Global Remote Contact

QMS and Accreditations

Global Remote runs one integrated management system for quality, environment, and health and safety, across every service it delivers. It is certified to ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018, and it is what makes every operation follow the same documented procedures, wherever the work is done.

Operations and materials are monitored daily against management controls, detailed operational procedures and contingency plans, so that hazards are identified, managed and reduced in every job, not only the ones that happen to be audited. The standing objective is no accidents, no waste and no defects.

Improvement is continual: built-in procedural controls, third-party assessment and staff training carry the objectives forward, and a finding at an audit becomes a change to the procedure rather than a note in a file. The system remains compliant with the relevant national and international standards and legislation, and it is certified separately in each country Global Remote operates from, so the certificate covering a site is the one audited there.

Further to my PTW audit at 2H2P Purge Gas Drum area yesterday, could you please forward a copy of a completed Global Remote Daily Safety Checklist (not for this job) as I consider this to be a best practice control measure and needs to be shared with others. This form also needs to be included in any future RAMS, please.

David Hurlock, following a permit-to-work audit on a Global Remote site

India

IRATA · full member, trainer and operator, membership no. 3029/OT
ISO 9001:2015 · quality management, certified by Intertek
OH&S · ISO 45001:2018, certified by Intertek
GWO certified training provider · Basic Safety Training: Working at Height, Fire Awareness, First Aid and Manual Handling, at the fixed training facility in Chennai
IRATA International certificate confirming Global Remote Integrated Access Solutions Pvt Ltd, Chennai, as a full member (trainer), membership no. 3029/OT.
IRATA full member, trainer Issued by IRATA International. Membership no. 3029/OT, certification expiry 25 September 2028. View the PDF
IRATA International certificate confirming Global Remote Integrated Access Solutions Pvt Ltd, Chennai, as a full member (operator), membership no. 3029/OT.
IRATA full member, operator Issued by IRATA International. Membership no. 3029/OT, certification expiry 25 September 2028. View the PDF
Intertek certificate of registration for Global Remote Integrated Access Solution Pvt Ltd, Chennai, conforming to ISO 9001:2015.
ISO 9001:2015 Certified by Intertek, UKAS accredited. Certificate no. 0174079, valid until 2 May 2027. View the PDF
Intertek certificate of registration for Global Remote Integrated Access Solution Pvt Ltd, Chennai, conforming to ISO 45001:2018.
ISO 45001:2018 Certified by Intertek, UKAS accredited. Certificate no. 0174080, valid until 2 May 2027. View the PDF
TÜV India certificate confirming Global Remote Integrated Access Solutions Private Limited, Chennai, meets the GWO criteria for training providers offering GWO training, for Basic Safety Training in Working at Height, Fire Awareness, First Aid and Manual Handling.
GWO training provider Issued by TÜV India. Registration no. IND 500 26397158, valid from 26 March 2026 until 25 March 2028. View the PDF

Bahrain

IMS · Integrated Management System
ISO 9001:2015 · quality management, certified by ACS W3 Solutionz
ISO 14001:2015 · environmental management, certified by ACS W3 Solutionz
ISO 45001:2018 · occupational health and safety, certified by ACS W3 Solutionz
ACS W3 Solutionz certificate for Global Remote Bahrain WLL, Kingdom of Bahrain, confirming its quality management system conforms to ISO 9001:2015.
ISO 9001:2015 Certified by ACS W3 Solutionz, IAS accredited. Certificate no. 25.67.BH502001, valid until 19 May 2028. View the PDF
ACS W3 Solutionz certificate for Global Remote Bahrain WLL, Kingdom of Bahrain, confirming its environmental management system conforms to ISO 14001:2015.
ISO 14001:2015 Certified by ACS W3 Solutionz, IAS accredited. Certificate no. 25.67.BH502002, valid until 19 May 2028. View the PDF
ACS W3 Solutionz certificate for Global Remote Bahrain WLL, Kingdom of Bahrain, confirming its occupational health and safety management system conforms to ISO 45001:2018.
ISO 45001:2018 Certified by ACS W3 Solutionz, IAS accredited. Certificate no. 25.67.BH502003, valid until 19 May 2028. View the PDF

UAE

IRATA · full member, trainer and operator, membership no. 7066/OT
IMS · Integrated Management System
ISO 9001:2015 · quality management, certified by First Quality Certification
ISO 14001:2015 · environmental management, certified by First Quality Certification
ISO 45001:2018 · occupational health and safety, certified by First Quality Certification
IRATA International certificate confirming Inside Exploration Technologies Maintenance Oil Facilities LLC, Abu Dhabi, as a full member (trainer), membership no. 7066/OT.
IRATA full member, trainer Issued by IRATA International. Membership no. 7066/OT, certification expiry 26 June 2028. View the PDF
IRATA International certificate confirming Inside Exploration Technologies Maintenance Oil Facilities LLC, Abu Dhabi, as a full member (operator), membership no. 7066/OT.
IRATA full member, operator Issued by IRATA International. Membership no. 7066/OT, certification expiry 26 June 2028. View the PDF
First Quality Certification certificate of registration for Inside Exploration Technologies Maintenance Oil Facilities LLC, Abu Dhabi, confirming its quality management system conforms to ISO 9001:2015.
ISO 9001:2015 Certified by First Quality Certification, ASCB accredited. Certificate no. FQC/Q/4090/AE, valid until 27 October 2029. View the PDF
First Quality Certification certificate of registration for Inside Exploration Technologies Maintenance Oil Facilities LLC, Abu Dhabi, confirming its environmental management system conforms to ISO 14001:2015.
ISO 14001:2015 Certified by First Quality Certification, ASCB accredited. Certificate no. FQC/E/4091/AE, valid until 27 October 2029. View the PDF
First Quality Certification certificate of registration for Inside Exploration Technologies Maintenance Oil Facilities LLC, Abu Dhabi, confirming its occupational health and safety management system conforms to ISO 45001:2018.
ISO 45001:2018 Certified by First Quality Certification, ASCB accredited. Certificate no. FQC/OH/4092/AE, valid until 27 October 2029. View the PDF

Qatar

IRATA · operator, member 7068/O
ISO 9001:2015 · quality management, certified by Bureau Veritas
ISO 14001:2015 · environmental management, certified by Bureau Veritas
ISO 45001:2018 · occupational health and safety, certified by Bureau Veritas
ISO/IEC 17025:2017 · testing and calibration laboratories, certified by American Quality System Registrars
IRATA International certificate confirming Inside Exploration Technologies W.L.L, Doha, as a full member (operator), membership no. 7068/O.
IRATA full member, operator Issued by IRATA International. Membership no. 7068/O, certification expiry 9 June 2028. View the PDF
Bureau Veritas certificate for Inside Exploration Technologies WLL, Doha, confirming its management system conforms to ISO 9001:2015.
ISO 9001:2015 Certified by Bureau Veritas, UKAS accredited. Certificate no. QA003648, valid until 4 August 2027. View the PDF
Bureau Veritas certificate for Inside Exploration Technologies WLL, Doha, confirming its management system conforms to ISO 14001:2015.
ISO 14001:2015 Certified by Bureau Veritas, UKAS accredited. Certificate no. QA003650, valid until 4 August 2027. View the PDF
Bureau Veritas certificate for Inside Exploration Technologies WLL, Doha, confirming its management system conforms to ISO 45001:2018.
ISO 45001:2018 Certified by Bureau Veritas, UKAS accredited. Certificate no. QA003649, valid until 4 August 2027. View the PDF
American Quality System Registrars certificate of registration for Inside Exploration Technologies, Doha, confirming conformity to ISO/IEC 17025:2017 for tank calibration and for non-destructive testing and inspection services.
ISO/IEC 17025:2017 Certified by American Quality System Registrars, USAC accredited. Certificate no. 18820, valid until 26 August 2027. View the PDF